Measuring Guide for Drawer Boxes

OVERVIEW - The tolerances shown below need to be achieved for your drawer box to fit properly per slide used.		STEP A- Measure drawer opening and cabinet depth - record measurements and go to step B
A = Side clearance needed for drawer slides B = Top clearance needed for drawer slides C = Bottom clearance needed for drawer slides D = Cabinet Depth clearance needed for drawer slides		W= Width of Drawer Frame Opening H = Height of Drawer Frame Opening D = Depth of FRONT of Face Frame to inside rear of cabinet

STEP B - Subtract The below tolerances needed per the type of slides you will be using THIS WILL BE YOUR FINAL BOX MEASUREMENT
SIDE MOUNT DRAWR SLIDES	UNDER MOUNT DRAWER SLIDES
W = minus 1" H = minus 1/2" minimum D = minus 1" minumum	W = minus 1/2" minimum H = minus 1" D= minus 1" minumum
EXAMPLE	EXAMPLE
STEP A - W= 18"   H= 6"   D= 23" Box Size would be W 17" x H 5-1/2" x D 22"	STEP A - W= 18"   H= 6"   D= 23" Box Size would be W 17-1/2" x H 5" x D 22"
NOTE: Industry standard depth on drawer boxes is 22"